8.2.2 Adding Email
Purpose:
Alarm messages are sent to receiving e-mails via sending e-mails.
Before you start:
Set DNS server first. Refer to section 8.1.5.1 DNS Server for detailed steps.
8.2.2.1 Sending Email
Steps:
1. Click button.
2. Enter User Name, Password, SMTP, and SMTP Port.
User Name: sending e-mail account.
Password: sending e-mail password.
SMTP: sending e-mail server website.
SMTP Port No.: sending e-mail server port.
3. Click OK to add the sending e-mail.
Figure 8. 11 Configure Sending Email
8.2.2.2 Receiving Email
Steps:
1. Click Add Email User.
2. Enter Email and User Name.
3. Choose Event Level as Alarm Event or Serious Event.
4. Click OK and click OK in confirmation dialog box to add the user. The added e-mail account is listed in List of
email alarm users.
To Next Page
Loading...
Need help?
General
