DS-A80&81 Series Storage System User Manual
103
8.3.1 Adjusting System Time
8.3.1.1 Manual Adjust
Steps:
Do one or more of the following:
Adjust Time Zone
1. Click Modify of Current System Time Zone.
2. Select time zone in the dropdown list.
3. Click OK and click OK in confirmation dialog box.
Adjust Date and Time
4. Click Modify of Current Time.
5. Select date and time in text field.
6. Click OK and click OK in confirmation dialog box.
Figure 8. 18 Adjust Time Manually
8.3.1.2 Auto Adjust
Purpose:
Storage system automatically adjusts system time according to time server.
Before you start:
Turn off the NTP server in client software.
Steps:
1. Enter a correct Time Server IP Address in text field.
2. Click Enable of NTP Server Status to start auto time adjust.
Figure 8. 19 Adjust Time Automatically
8.3.2 Synchronizing Time
Purpose:
You can configure time synchronization strategy.
Before you start:
Turn off the NTP server in client software.
Log in storage system via resource IP address.
Steps: