9.5.9 Set Image Parameters
You can adjust the image parameters, video parameters, supplement parameters, beauty, image
fusion and capture interval.
Steps
1.
Click
Conguraon → Image .
2.
Congure the parameters to adjust the image.
Image Adjust(Video Standard)
Set the video frame rate when performing live view remotely.
Aer changing the standard,
you should reboot the device to take eect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
Backlight
Enable or disable the WDR
funcon.
When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brightness level of the whole image and provide clear images with details.
Video Adjustment
Drag the block or enter the value to adjust the live video's brightness, contrast, saturaon,
and sharpness.
LED Light Parameters
Set the LED light type, mode, and brightness.
Capture Interval
You can select the capture interval according to your actual needs.
Beauty
Set whiten and smooth value for the face appeared on the device live view page.
Image Fusion
Wen the environment is dark, you can select Automac to enable the image fusion funcon.
The live view page will display the fusion image. And you can also set the sensivity.
Select Disable to disable the funcon.
3.
Click Default to restore the parameters to the default sengs.
DS-K1T673 Series Face Recognion Terminal User Manual
102
To Next Page
Loading...
Need help?
General
