HIKVISION DS-K1T673M User Manual

Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
5.
Tap OK.
7.2
Communicaon Sengs
You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand
parameters, ISUP and access to Hik-Connect on the
communicaon sengs page.
7.2.1 Set Wired Network Parameters
You can set the device wired network parameters, including the IPv4/IPv6 IP address, the subnet
mask, the gateway, and DNS parameters.
Steps
1.
Tap System → Comm. (Communicaon Sengs) on the Home page to enter the Communicaon
Sengs
page.
2.
On the Communicaon Sengs page, tap Wired Network.
DS-K1T673 Series Face Recognion Terminal User Manual
50

HIKVISION DS-K1T673M Specifications

General

Brand	HIKVISION
Model	DS-K1T673M
Category	Touch terminals
Language	English