Chapter 3 Installaon
3.1 Installaon Environment
●
Avoid backlight, direct sunlight, and indirect sunlight.
●
For
beer recognion, there should be light source in or near the installaon environment.
●
If you have to install the device outdoors, you should install a
protecve shield (oponal) for the
device.
Note
For details about installaon environment, see Tips for Installaon Environment.
3.2 Flush Mounng with Gang Box
Before You Start
Remove the back sheet of the device.
Steps
1.
Make sure the gang box is installed on the wall.
Note
Gang box is not supplied.
DS-K1T673 Series Face Recognion Terminal User Manual
6