HIKVISION DS-K3G200LX-R/Dm55 User Manual

Set Card No. Authencaon Parameters
Set the card reading content when authencate via card on the device.
Go to
Conguraon → Card Sengs → Card No. Auth. Sengs .
Select a card authencaon mode and enable reversed card No. at your actual needs. Click Save.
6.6.12 Set Privacy Parameters
Set the event storage type.
Go to Conguraon → Security → Privacy Sengs
The event storage type is overwring by default. The earliest 5% events will be deleted when the
system detects the stored events has been over 95% of the full space.
6.6.13 Upgrade and Maintenance
Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Maintenance and Security → Maintenance → Restart .
Click Restart to reboot the device.
Upgrade
Click Maintenance and Security → Maintenance → Upgrade .
Select an upgrade type from the drop-down list. Click
and select the upgrade le from your
local PC. Click Upgrade to start upgrading.
Note
Do not power o during the upgrading.
Restore Parameters
Click Maintenance and Security → Maintenance → Backup and Reset .
Restore All
All parameters will be restored to the factory sengs. You should acvate the device before
usage.
Restore
The device will restore to the default
sengs, except for the network parameters and the user
informaon.
DS-K3G200(L)X Series Tripod Turnsle
40

HIKVISION DS-K3G200LX-R/Dm55 Specifications

General

Brand	HIKVISION
Model	DS-K3G200LX-R/Dm55
Category	Turnstiles
Language	English