HIKVISION DS-K3G200LX-R/Dm55 User Manual

Name
Edit the card reader name as desired.
Alarm Output Acve Time
How long the alarm output will last aer triggered.
4.
Click OK.
5.
Oponal: Set the switch on the upper right corner to ON to trigger the alarm output.
Congure Parameters for Lane Controller
Aer adding the lane controller to the client, you can congure its parameters for passing through
the lane.
Before You Start
Add access control device to the client.
Steps
1.
Click Access Control → Advanced
Funcon → Device Parameter to enter Parameter Sengs
page.
2.
In the device list on the
le, select a lane controller and you can edit the lane controller's
parameters on the right.
3.
Edit the parameters.
Passing Mode
Select the controller which will control the barrier status of the device.
Alarm Voice Prompt Time
Duraon
Set how long the audio will last, which is played when an alarm is triggered .
Note
0 refers to the alarm audio will be played unl the alarm is ended.
Temperature Unit
Select the temperature unit that displayed in the device status.
Lightboard Brightness
Adjust the brightness of the device light.
Memory Mode
Mulple cards presenng for mulple persons passing is allowable when enabling the
memory mode. When the passing person's number exceeds the card presenng number, or
aer the latest person passing with no other person passing within the door open duraon,
the door will closed automacally.
4.
Click OK.
DS-K3G200(L)X Series Tripod Turnsle
64

HIKVISION DS-K3G200LX-R/Dm55 Specifications

General

Brand	HIKVISION
Model	DS-K3G200LX-R/Dm55
Category	Turnstiles
Language	English