iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 15
Window Division
• : 1 × 1 window division
• : 2 × 2 window division
• : 3 × 3 window division
• : 4 × 4 window division
Light
Click to turn on or turn off the illuminator.
Count Pixel
Use to get the height and width pixel of the selected region in the live view image.
Steps
1. Click to enable the function.
2. Drag the mouse on the image to select a desired rectangle area.
The width pixel and height pixel are displayed on the bottom of the live view image.
Start Digital Zoom
Use to see a detailed information of any region in the image.
Steps
1. Click to enable the digital zoom.
2. In the live view image, drag the mouse to select the desired region.
3. Click in the live view image to go back to the original image.
Auxiliary Focus
Use for motorized device to improve the image if the device cannot focus clearly.
For devices that support ABF, adjust the lens angle, then focus and click the ABF button on the device.
The device can focus clearly.
Click to focus automatically.
If the device cannot focus with auxiliary focus, you can use Lens Initialization, then use
auxiliary focus again to make the image clear.
If auxiliary focus cannot help the device focus clearly, you can use manual focus.
Lens Initialization
To Next Page
Loading...
Need help?
General
