iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 73
Chapter 9 System and Security
This section is an introduction to system maintenance, system settings, and security management, and
explains how to configure relevant parameters.
View Device Information
You can view device information, such as Device No., Model, Serial No., and Firmware Version. Enter
Configuration → System → System Settings → Basic Information to view the device information.
Search and Manage Log
Log helps locate and troubleshoot problems.
Steps
1. Go to Configuration → System → Maintenance → Log.
2. Set search conditions Major Type, Minor Type, Start Time, and End Time.
3. Click Search. The matched log files will be displayed on the log list.
4. Optional: Click Export to save the log files in your computer.
Simultaneous Login
The administrator can set the maximum number of users logging into the system through a Web browser
simultaneously.
1. Go to Configuration → System → User Management, click General and set Simultaneous Login.
Import and Export Configuration File
It helps speed up batch configuration on other devices with the same parameters.
1. Enter Configuration → System → Maintenance → Upgrade & Maintenance. Choose device parameters
that need to be imported or exported and follow the instructions on the interface to import or export
configuration file.
Export Diagnose Information
Diagnose information includes running log, system information, hardware information.
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Diagnose
Information to export diagnose information of the device.
Reboot
You can reboot the device via a browser.
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Reboot.
To Next Page
Loading...
Need help?
General
