HIKVISION IDS-2CD7A46G0-IZHS8 User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 75
Synchronize Time Manually
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click Manual Time Sync..
4. Choose one time synchronization method.
• Select Set Time, and manually input or select date and time from the pop-up calendar.
• Check Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.
Set NTP Server
You can use NTP server when accurate and reliable time source is required.
Before You Start
Set up a NTP server or obtain NTP server information.
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port, and Interval.
Server Address is NTP server IP address.
5. Click Test to test server connection.
6. Click Save.
Synchronize Time by Satellite
This function varies by device.
Steps
1. Enter Configuration → System → System Settings → Time Settings.
2. Select Satellite Time Sync.
3. Set Interval.

HIKVISION IDS-2CD7A46G0-IZHS8 Specifications

General

Brand	HIKVISION
Model	IDS-2CD7A46G0-IZHS8
Category	Security Camera
Language	English