HIKVISION iDS-TCM403-A User Manual

Figure 4-4 Set Arm Host
2.
Select Protocol Type.
Note
Supported funcons vary with dierent models. The actual device prevails.
License Plate Upload Protocol
Uploads arming alarm images of the license plate. You can enable Upload Binary Image if you
need to upload binary images full of black or white pixel points. Enable Output Binary Image
in BMP Format if you want to output images in this format.
Mixed Target Upload Protocol
Uploads images of mulple targets such as humans and vehicles. You can enable the body
property to recognize clothes, bags, and other
properes.
3.
Oponal: If you want to save the alarm informaon and pictures to the cloud storage, click to
set Cloud Storage. Refer to Set Cloud Storage for details.
4.
Click Save.
4.1.5 Set ISAPI Listening
ISAPI listening and SDK listening are mutually exclusive protocols. If you enable the picture
uploading listening, the device will transmit images via the SDK listening. If not, the device will
upload images via ISAPI protocol aer the ISAPI parameters are set.
Before You Start
The listening service has been enabled for the ISAPI host, and the network
communicaon with
the device is normal.
Steps
1.
Go to Conguraon → Network → Data Connecon → ISAPIListen .
Network Trac Camera Operaon Manual
17

HIKVISION iDS-TCM403-A Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-A
Category	Security Camera
Language	English