refer to Section 6.3.1 Configuring TCP/IP Settings.
Stream Type: Set the stream type to main stream or sub-stream for live view
by web browser. Please refer to Section 6.4.1 Configuring Video Settings for
the parameter settings of the main stream and sub-stream respectively.
Image Size: Set the image size to original, 4:3 or 16:9.
Live View Performance: Set the live view performance to Least Delay,
Balanced or Best Fluency.
Record File Settings: Set the saving path of the video files.
Record File Size: Select the packed size of manually recorded and downloaded
video files. The size can be set to 256M, 512M or 1G.
Save record files to: Set the saving path for the manually recorded video files.
Save downloaded files to: Set the saving path for the downloaded video files
in interface.
Picture and Clip Settings: Set the saving paths of the captured pictures and
clipped video files.
Save snapshots in live view to: Set the saving path of the manually captured
pictures in interface.
Save snapshots when playback to: Set the saving path of the captured
pictures in interface.
Save clips to: Set the saving path of the clipped video files in
interface.
Note: You can click to change the directory for saving video files, clips
and pictures.
3. Click to save the settings.
6.2 Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time which can be
displayed on the video. There are Time Zone, Time Synchronization, Daylight Saving
Time(DST) functions for setting the time. Time Synchronization consists of auto
mode by Network Time Protocol(NTP) server and manual mode.
To enter the Time Settings interface:
Configuration > Basic Configuration > System > Time Settings
Or Configuration > Advanced Configuration > System > Time Settings
To Next Page
Loading...
Need help?
General
