Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in
the mirror. The flip direction can be set to OFF, LEFT/RIGHT, UP/DOWN or CENTER.
Note: This function varies depending on the models of speed dome.
Slow Shutter
This function can be used in underexposure condition. It lengthens the shutter time
to ensure full exposure. The slow shutter value can be set to Low, Normal and High.
Figure 6-25 Slow Shutter
Lens Initialization
The lens operates the movements for initialization when you check the check box of
Lens Initialization.
BLC
If there’s a bright backlight, the subject in front of the backlight appears silhouetted
or dark. Enabling BLC(back light compensation) function can correct the exposure of
the subject. But the backlight environment is washed out to white.
White Balance
The White Balance mode can be set to Auto, Manual White Balance, Auto Tracing
and Onepush.
Auto:
In Auto mode, the camera retains color balance automatically according to the
current color temperature.
Manual White Balance:
In Manual mode, you can adjust the color temperature manually to meet your own
demand as shown in Figure 6-26.
Figure 6-26 Manual White Balance
Auto Tracing:
In Auto Tracing mode, white balance is continuously being adjusted in real-time
To Next Page
Loading...
Need help?
General
