according to the color temperature of the scene illumination.
Onepush:
Selecting Onepush mode, the viewed image retains color balance automatically
according to the current color temperature.
Note: This function varies depending on the models of speed dome.
Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can
be set to 18, 36, 72, 144 and 216.
Note: This function varies depending on the models of speed dome.
6.5.2 Configuring OSD Settings
Purpose:
The speed dome supports following on screen displays:
Zoom: Identifies the amount of magnification.
Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The
XXX following P indicates the degrees in pan direction, while the XXX following T
indicates the degrees in tilt position.
Time: Supports for time display.
Preset Title: Identifies preset being called.
Camera Name: Identifies the name of speed dome.
You can customize the on screen display of time.
Steps:
1. Enter the OSD Settings interface:
Configuration > Advanced Configuration > Image > OSD Settings
To Next Page
Loading...
Need help?
General
