Note
•
7 z
one types are selectable: Panic
Button Door Magnetic Smoke Detector,
Acti e Infrared, Passive Infrared, Gas Detector, and Doorbell.
•
3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it's
triggered.
Set the alarm type as delay alarm, and you should set the entering delay
duratio and exitin delay duration
•
Both the en
tering delay duratio and the exitin delay duratio are from 30s
t
o 60s.
•
For Gas Detector and Smoke Detector, the alarm type is set as default 24h
alarm. The alarm type of them can not be changed.
Arming Mode Settin
4 arming modes can be configu ed: stay mode, away mode, sleeping mode and
cus
tom mode.
Before You Start
Tap Settin →
→ Preference t
o enable Alarm.
Steps
Note
Arming status page and zone settin page are hidden by default. You should enable
alarm
functio fi st.
1.
T
ap Settin →
t
o enter the arming mode settin page.
2.
Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Network Indoor Statio Configu atio Guide
8
To Next Page
Loading...
Need help?
General
