Note
•
The ne
w password and confir password should be identi al.
•
Afte
editin the password of device, click refresh butto from the
device list, the added device will not be there. You should add the device
again with new password to operate the remote configu ation
RS-485
Click R
S485 to enter the RS-485 settin page. You can view and edit the
RS-485 parameters of the device.
Figure 2-11 RS-485 Settin
Note
For indoor statio and master
station there are 3 choices for the working
mode: transparent channel, disable, and custom.
2.4.2 Video Intercom
Click Video In
tercom on the remote configu atio page to enter the video intercom
parameters setting Device Number Configu ation Time Parameters, Password,
Zone Configu ation IP Camera Information and Volume Input and Output
Configu ation and so on.
Device ID Configu atio
Network Indoor Statio Configu atio Guide
27
To Next Page
Loading...
Need help?
General
