20
Installation MACH 1000
Release
04
12/2015
1.3 Description of the device variants
The MAR1020-..., MAR1022-..., MAR1120-... and MAR1122-... device
variants are MACH 1000 Ruggedized Switches without Gigabit ports and,
depending on the requirements, a selectable number (up to 24) of Fast
Ethernet ports (10/100 Mbit/s). You can choose the media for the Fast
Ethernet ports 1 to 24 in pairs.
The MAR1120-... and MAR1122-... devices have an additional Fast
Ethernet port on the front of the device that you can use for diagnosis
purposes.
The MAR1022-... devices support PoE in accordance with IEEE
802.3af.
The PoE ports are the Fast Ethernet ports 1 to 4.
In the MAR1120-... devices, all the cable outlets are at the back, i.e.
the ports are on the back of the device.
The MAR1122-... devices support PoE in accordance with IEEE
802.3af.
The PoE ports are the Fast Ethernet ports 1 to 4.
All the cable outlets are at the back, i.e. the ports are on the back of
the device.
The MAR1030-..., MAR1032-..., MAR1130-... and MAR1132-... device
variants are MACH 1000 Ruggedized Switches with 2 or 4 Gigabit ports
(10/100/1000 Mbit/s) and, depending on the requirements, a selectable
number (up to 24) of Fast Ethernet ports (10/100 Mbit/s).
You can choose the media for the Fast Ethernet ports 1 to 24 in pairs.
In device variants with 2 Gigabit Ethernet ports, these ports are combo
ports (2 x SFP slot: 100/1000 Mbit/s, alternatively:
2 x twisted pair RJ45 socket: 10/100/1000 Mbit/s).
In device variants with 4 Gigabit Ethernet ports, these can be optionally -
SFP slots (2 x 2 slots),
- twisted pair RJ45 sockets (2 x 2 sockets) or
- 2 x SFP slots plus 2 x twisted pair RJ45 sockets.
The MAR1130-... and MAR1132-... devices have an additional Fast
Ethernet port on the front of the device that you can use for diagnosis
purposes.
The MAR1032-... devices support PoE (Power over Ethernet) in
accordance with IEEE 802.3af. The PoE ports are the Fast Ethernet
ports 1 to 4.
In the MAR1130-... devices, all the cable outlets are at the back, i.e.
the ports are on the back of the device.
The MAR1132-... devices support PoE (Power over Ethernet) in
accordance with IEEE 802.3af. The PoE ports are the Fast Ethernet
ports 1 to 4.
In these devices, all the cable outlets are at the back, i.e. the ports are
on the back of the device.
To Next Page
Loading...
Need help?
General
