Hirschmann MACH 1030 User Manual

6
Installation MACH 1000
Release 04 12/2015
 Installation site requirements
 Install this device solely in a switch cabinet or in an operating site with
restricted access, to which maintenance staff have exclusive access.
 Mount the device horizontally in a cabinet or vertically on a flat surface.
Operating the device as a table unit is inadmissible.
See “General technical data” on page 55.
 Install the device in a fire protected shell if you are mounting it
vertically.
 If you are operating the device in a 19" switch cabinet: install
sliding/mounting rails for supporting the weight of the device.
 When you are selecting the installation location, make sure you
observe the climatic threshold values specified in the technical data.
 Use the device in an environment with a maximum pollution degree
that complies with the specifications in the technical data.
 Qualification requirements for personnel
 Only allow qualified personnel to work on the device.
Qualified personnel have the following characteristics:
 Qualified personnel are properly trained. Training as well as practical
knowledge and experience make up their qualifications. This is the
prerequisite for grounding and labeling circuits, devices, and systems
in accordance with current standards in safety technology.
 Qualified personnel are aware of the dangers that exist in their work.
 Qualified personnel are familiar with appropriate measures against
these hazards in order to reduce the risk for themselves and others.
 Qualified personnel receive training on a regular basis.
 Device casing
Only technicians authorized by the manufacturer are permitted to open
the casing.
 Make sure there is at least 3.94 inches (10 cm) of space in front of the
ventilation slits of the housing.
See “General technical data” on page 55.
 Never insert pointed objects (narrow screwdrivers, wires, etc.) into the
device or into the connection terminals for electric conductors. Do not
touch the connection terminals.
 Do not touch the housing during operation or shortly after switching off
the device. Hot surfaces can cause injury.
 Operating the device in the maximum surrounding air temperature and
stacking devices: When installing the device, make sure there is at
least one free rack space (approx. 5 cm) above the device, because
heat is discharged via the housing of the device.

Hirschmann MACH 1030 Specifications

General

Brand	Hirschmann
Model	MACH 1030
Category	Network Router
Language	English