8
To connect your TV to your network wirelessly
, you need a wireless router or modem. See the illustration below.
Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using
IEEE 802.11n router. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.
NOTES
•
Y
ou must use the Hisense’
s buil
t-in Wireless LAN Adapter to use a wireless network, the set doesn’t support external USB
network adapter.
•
To use a wireless network, your
TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your
TV can use a DHCP or static IP address to connect to the wireless network.
•
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is
currently being used by another device nearby, this will result in interference and communication failure.
•
If you apply a security system other than the systems listed below, it will not work with the TV
.
•
If Pure High-t
hroughput
(Greenf
ield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES
(WPS2 Mixed) for your Access Point (AP), this player will not support a connection in compliance with new Wi-Fi certification
specifications.
•
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration)
or
PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
•
Connection Methods: You can setup the wireless network connection three ways.
-Scan
-Manual
-Auto
Connecting to a Wireless Network
Wireless IP Sharer(Router)
(with DHCP Server)
LAN Cable
Wireless
LAN Adapter
built-in TV set
The LAN Port on
the Wall
Getting Started
To Next Page
Loading...
Need help?
General
