EasyManuals Logo

Hisense 50H5GB User Manual

Hisense 50H5GB
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10
Basic Features
8. Input Source.
Press [/
] to select the TV signal source.
Input Source
Next
6. Input Source
1. Press the [CH
V
/V] (or [CH +/-]) on the TV/remote control
to change the channel.
2. Press the [VOL
V
/V] (or [VOL +/-]) on the TV/remote
control to adjust the volume.
3. Press the numeric buttons on the remote control to
display the corresponding channels.
Changing Channels / Volume
NOTE
Changing the channels can also be achieved by directly
entering the channel number using the numeric keys on
the remote control. If you are entering a two or three digit
channel number, the time between key presses should be
less than 3 seconds.
7. Select Network : Connect your TV to access the
network.
Previous Next
5.Network Next: Channel Search
Select Access Point
Auto Scan
Manual Input
Manually input the configurations of
Access Point in your wireless network
Press [RED] to skip
“Network Connection” and “Network Setup”.
AV
Component
HDMI1
HDMI2
TV
Previous
Note: If you use an antenna to receive channels, then
you must complete the first-time setup menu in order to
run a channel scan.
Choose from one of the following sources below and then
move to the next screen.
TV
AV
• Component
• HDMI1
• HDMI2
• HiMedia
Congratulations! You have completed the setup menu.
Press the [OK] on your remote to select [GO] if you are
okay with the selections that appear on the screen.
Otherwise, navigate to the [Previous] button on the screen to
change your selection.

Other manuals for Hisense 50H5GB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense 50H5GB and is the answer not in the manual?

Hisense 50H5GB Specifications

General IconGeneral
Screen Typeled
Features480 ultra smr
Tunerdigital
Screen Size49.5 inches, 50 inches
Refresh Rate120hz
Closed Captioningyes
HDRno
Built-In Speakersyes
Speakers Output20 watts
USB Ports2
RF Antennayes
Networkbuilt-in wi-fi
Headphones Outputyes
Digital Optical Audio Outputs1
Analog Audio Outputs1
Component Video Inputs1
Composite Video Inputs1
DVI0
SmartTVhisense smart tv
3Dno
Power Consumption150 kilowatt hours
Depth with Stand9.6 inches
Height with Stand27.5 inches
Width with Stand44.1 inches
Net Weight with Stand28.2 pounds
Depth without Stand3.1 inches
Height without Stand25.5 inches
Net Weight without Stand26.5 pounds

Related product manuals