Hitachi Advanced Server HA820 G2 User Guide 46
Procedure
1.
Power down the server.
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack.
4.
Remove the access panel.
5.
Remove the riser cage.
6.
Remove the blank.
Removing the hard drive blank
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
Figure 1 Removing an SFF drive blank
To Next Page
Loading...
Need help?
General