Hitachi HA820 G2 User Manual

Hitachi Advanced Server HA820 G2 User Guide 135
12. Power up the server.
The installation is complete.
Installing the Systems Insight Display
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• The components included with the hardware option kit
• T-10 Torx screwdriver
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack.
• Remove the server from the rack.
4. Remove the access panel.
5. Do one of the following:
• Remove the air baffle.
• If installed, remove the 4LFF midplane drive cage.
6. Remove the fan cage.
7. Disconnect the power switch module cable from the power switch/SID module connector. The SID
module cable connects to the same connector.
8. Remove the power switch module. Retain the T-10 screw.

Hitachi HA820 G2 Specifications

General

Brand	Hitachi
Model	HA820 G2
Category	Server
Language	English