Hitachi Advanced Server HA820 G2 User Guide 123
a.
Using a T-30 Torx screwdriver, tighten the nuts.
NOTE:
Do not tighten the nuts more than 12 in-lbs or 1.3Nm. Overtightening could crack or damage the nuts.
The installation is complete.
Installing a high performance heatsink
Prerequisites
CAUTION:
Installing a high performance heatsink requires the installation of a processor assembly onto
the heatsink. To avoid damage to server or components, do not remove or install the processor
assembly when installing or replacing other heatsinks.
Before installing this option, be sure that you have the following
:
To Next Page
Loading...
Need help?
General