Hitachi YUTAKI S Series Installation And Operation Manual

52
PMEN0643 rev.0 - 04/2023
7
REMOVING THE COVERS
MAINTENANCE
7.1 Removing the covers
If it is necessary to access to the indoor unit components, please follow these operaons.
7.1.0.1 Removing the indoor unit service cover
 NOTE
The indoor unit service cover needs to be removed for any task inside the indoor unit.
1 Remove the screws which x the service cover.
(x2) Both sides
2 Slide the service cover slightly upward and remove it pulling to back.
! CAUTION
• Pay aenon of no falling o the service cover.
• Take care when removing service cover; the parts inside the unit could be hot.

Hitachi YUTAKI S Series Specifications

General

Type	Air-to-Water Heat Pump
Refrigerant	R410A
Cooling Capacity	2.5 - 16 kW
Operating Temperature Range (Cooling)	46°C
Indoor Unit Dimensions	Varies by model
Outdoor Unit Dimensions	Varies by model
Noise Level	Varies by model