19X1 MD80-S Manual 1.0 en
Installation Requirements and Recommendations
Installation and Cooling Requirements
HANDLING THE AUDIO MODULE
STORING
Audio Modules shall be contained in their packaging or
travel cases to protect from damage, until installation.
INSTALLATION
• Audio Modules shall be kept on a at, even, and
stable surface with sufcient load-carrying capacity,
to prevent them falling or tipping.
• Audio Modules shall not be lifted by any other means
than the rigging points identied.
• Audio Modules shall only be ‘stood’ on the bottom,
top, or sides. They shall not be stood on the
Electronics Package (rear of Audio Module) or front
grille. Standing in any other way can damage the
Audio Module.
The Modul 80-S is a heavy device
and should not be carried by
operators, or handled without
suitable equipment.
!
Disconnect the Modul 80-S from
both power connections before
handling/moving/rigging the device
to avoid shock hazard.
To Next Page
Loading...
Need help?
General