HOLOPLOT X1 User Manual

40X1 MD80-S Manual 1.0 en
X1 Modul 80-S Data Sheet
CONFIGURATION:
THREE-LAYER MATRIX ARRANGEMENT
Sub layer
LF layer
HF layer
1x 18-inch sensor-controlled subwoofer with two high energy, high-density neodymium-
iron-boron magnets in a bandpass enclosure with air-ow optimized ports
16x 5-inch cone driver in individual dual-ported chambers
64x 1.3-inch soft dome tweeter with integrated waveguides
Sub layer
LF layer
HF layer
MAXIMUM SPL
(for optimized parallel beam conguration
1
)
131 dB (full space) / 137 dB (half space)
2
141 dB
2
150 dB
2
Number of beams
Vertical
Horizontal
BEAMFORMING CAPABILITIES:
3
HOLOPLOT 3D AUDIO-BEAMFORMING TECHNOLOGY
Steering angle and Up to 12 beams in parallel per X1 Matrix Array:
• 8 fully user-congurable parametric beams and virtual sources
• 4 beams providing optimized coverage over a predened audience area
Steering angle and opening angle user adjustable (0.1° steps) /
dened by HOLOPLOT algorithms
Steering angle and opening angle user adjustable (0.1° steps) /
dened by HOLOPLOT algorithms
±3 dB
-10 dB
FREQUENCY RESPONSE
30 - 18,000 Hz
26 - 20,000 Hz
Data Sheet
3
Beamforming capabilities are dependent
on array size and should be assessed using
HOLOPLOT Plan
1
Max. SPL capabilities are dependent on
beam conguration and array size and
should be assessed using HOLOPLOT Plan
2
Peak level referred back to 1 m under free
eld conditions using band-limited pink
noise with crest factor 4

HOLOPLOT X1 Specifications

General

Brand	HOLOPLOT
Model	X1
Category	Speaker System
Language	English