Honda BF15D Owner's Manual

90
REMOVAL FROM STORAGE
STORAGE
PROTECTOR
CASE PROTECTOR
BEFORE
OPERATION
Any other horizontal storage position
may cause damage or oil leakage.
Cover the outboard motor to keep out
dust. Do not use sheet plastic as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.
Check your outboard motor as
described in the
chapter of this manual.
If the cylinders were coated with oil
during storage preparation, the
engine may smoke briefly at startup.
This is normal.
If storing horizontally, be sure to fold
the tiller handle, and rest the
outboard motor on its case protectors.
Be sure all water has drained from
the outboard motor before placing it
on its side, so no residual water can
enter the engine exhaust port.
Store the outboard motor either
vertically or horizontally with the
tiller handle side up.
04/03/15 10:37:37 31ZY0600_091

Honda BF15D Specifications

General

Displacement	350 cc (21.4 cubic inches)
HP Rating	15 HP
Fuel Delivery	1 Carburetor
Ignition System	Digital CDI
Cooling System	Water Cooled
Gear Ratio	2.08:1
Lubrication	Wet Sump
Gear Shift	F-N-R
Engine Type	4-stroke
Full Throttle RPM Range	5000 - 6000 rpm
Starting System	Manual
Exhaust	Through Propeller
Fuel Tank Capacity	External tank
Oil Capacity	1.1 L
Fuel	Unleaded Gasoline
Shaft Length	15 inches