Honda BF15D User Manual

BF15D-BF20D
~ ~ ~
4. STERN BRACKET
a. REMOVAL
Tiller handle S type
Remove the following:
- oil case (P. 12-2).
- friction adjusting lever (P. 12-4).
- mount frame (P. 12-6).
Remove the adjusting rod.
Loosen the
8 mm self-locking nut, then remove the 6 mm
hex. nut, 6 mm plain washer, 6 mm distance collar and 6
x 160 mm hex bolt.
Remove the
8 mm self-locking nut, 8 mm washer, tilt
spring and 10 mm washer.
Remove the right stern bracket and
10 mm washers.
Remove the tilting bolt, 10 mm washer, carrying handle
and left stern bracket.
Remove the tilting bushings if necessary.
[31
CARRYING HANDLE
t11
PI
/
10 mm WASHER (2)
TILT SHAFT
BUSHING (2)
/
~51
TILTING BOLT
mm WASHER
~41
6 x 160
HEX. B
t131
LEFT STERN BRACKET
ELF-LOCKING NUT
COLLAR
ADJUSTING ROD
1 2-7

Honda BF15D Specifications

General

Displacement	350 cc (21.4 cubic inches)
HP Rating	15 HP
Fuel Delivery	1 Carburetor
Ignition System	Digital CDI
Cooling System	Water Cooled
Gear Ratio	2.08:1
Lubrication	Wet Sump
Gear Shift	F-N-R
Engine Type	4-stroke
Full Throttle RPM Range	5000 - 6000 rpm
Starting System	Manual
Exhaust	Through Propeller
Fuel Tank Capacity	External tank
Oil Capacity	1.1 L
Fuel	Unleaded Gasoline
Shaft Length	15 inches