Honda CLICK125 User Manual

Honda SMART Key Indicator
CA type
Replacing the Honda SMART Key
Battery 2 P. 97
#
When the Honda SMART Key
indicator is flashing while the
ignition switch is in the (On)
position
The Honda SMART Key indicator flashes
when communication between your vehicle
and Honda SMART Key stops after turning
the ignition switch to the (On) position.
It is probably caused by the following:
● Strong radio waves or noise are affecting
the system
● You lose the Honda SMART Key while
riding
However, this does not affect the operation
of your vehicle until stop the engine except
the idling stop.
If you turn the ignition switch to the SEAT,
(Off) or (Lock) position while the Honda
SMART Key indicator is flashing, the Honda
SMART Key indicator will flash faster for
about 20 seconds, automatically go off, and
then the ignition switch will lock.
u Turn signals blink at the beginning and
end of this function.
The buzzer also rings at this time.
To stop this flashing and ringing, press and
hold the ignition switch for more than 2
seconds. After the flashing and ringing stop,
the ignition switch is locked.
If you do not have the Honda SMART Key,
the ignition switch can be unlocked in
another way. 2 P. 112
20221206110820_32K2VD000_eng_BOOK Page 106 Tuesday, December 06 2022 11:12:16 JST
Warning Indicators On or Flashing u Honda SMART Key Indicator
Troubleshooting
103

Honda CLICK125 Specifications

General

Fuel System	PGM-FI (Programmed Fuel Injection)
Starter System	Electric
Front Suspension	Telescopic Fork
Rear Brake	Mechanical Leading Trailing
Front Tire	80/90-14
Rear Tire	90/90-14
Seat Height	769 mm
Curb Weight	111 kg
Bore x Stroke	52.4 x 57.9 mm
Compression Ratio	11.0:1
Ignition System	Full Transistorized
Frame Type	Underbone
Wheelbase	1, 280 mm
Ground Clearance	132 mm
Max Torque	10.8 Nm @ 5, 000 rpm
Engine Type	4-stroke, SOHC
Transmission	V-Matic
Front Brake	Hydraulic Disc
Fuel Tank Capacity	5.5 liters
Max Power	8.3 kW @ 8, 500 rpm