Honda CLICK125 User Manual

Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your vehicle:
● Fuel level - Fill fuel tank when necessary
2 P. 62
●
Throttle - Check for smooth opening and
full closing in all steering positions 2 P. 96
●
Engine oil level - Add engine oil if necessary.
Check for leaks 2 P. 85
●
Coolant level - Add coolant if required.
Check for leaks 2 P. 87
● Brakes - Check operation;
Front: check brake fluid level and pads wear
2 P. 89, 2 P. 90
Rear: check shoes wear and freeplay, adjust
if necessary 2 P. 94, 2 P. 91
● Lights and horn - Check that lights,
indicators and horn function properly
● Side stand ignition cut-off system - Check
for proper function 2 P. 95
● Wheels and tyres - Check condition, air
pressure and adjust if necessary 2 P. 79
20221206110820_32K2VD000_eng_BOOK Page 76 Tuesday, December 06 2022 11:12:16 JST
Maintenance
73

Honda CLICK125 Specifications

General

Fuel System	PGM-FI (Programmed Fuel Injection)
Starter System	Electric
Front Suspension	Telescopic Fork
Rear Brake	Mechanical Leading Trailing
Front Tire	80/90-14
Rear Tire	90/90-14
Seat Height	769 mm
Curb Weight	111 kg
Bore x Stroke	52.4 x 57.9 mm
Compression Ratio	11.0:1
Ignition System	Full Transistorized
Frame Type	Underbone
Wheelbase	1, 280 mm
Ground Clearance	132 mm
Max Torque	10.8 Nm @ 5, 000 rpm
Engine Type	4-stroke, SOHC
Transmission	V-Matic
Front Brake	Hydraulic Disc
Fuel Tank Capacity	5.5 liters
Max Power	8.3 kW @ 8, 500 rpm