Honda CLICK125 User Manual

Basic Operation Flow
20221206110820_32K2VD000_eng_BOOK Page 15 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
12
#
Pre-ride Inspection (P.73)
Carefully inspect your vehicle to
make sure that it is safe to ride.
#
Acceleration (P.60)
Apply throttle gradually.
Obey the speed limit.
How to use basic features.
• Instruments (P.16)
• Indicators (P.23)
• Switches (P.26)
• Steering Lock (P.28)
#
Starting the Engine (P.55)
Start and warm the engine.
Avoid revving the engine.
#
Starting the Vehicle
(P.60)
Before pulling away, indicate
your direction with the turn
signal switch, and check for
oncoming traffic.
• Rear Brake Lock (P.50)
•
II CA type
Shutter (P.30)
• Idling Stop System (P.51)

Honda CLICK125 Specifications

General

Fuel System	PGM-FI (Programmed Fuel Injection)
Starter System	Electric
Front Suspension	Telescopic Fork
Rear Brake	Mechanical Leading Trailing
Front Tire	80/90-14
Rear Tire	90/90-14
Seat Height	769 mm
Curb Weight	111 kg
Bore x Stroke	52.4 x 57.9 mm
Compression Ratio	11.0:1
Ignition System	Full Transistorized
Frame Type	Underbone
Wheelbase	1, 280 mm
Ground Clearance	132 mm
Max Torque	10.8 Nm @ 5, 000 rpm
Engine Type	4-stroke, SOHC
Transmission	V-Matic
Front Brake	Hydraulic Disc
Fuel Tank Capacity	5.5 liters
Max Power	8.3 kW @ 8, 500 rpm