Honda CRF230F 2017 User Manual

43
CRF230F
No. Items Inspection for Action
Refer to
page
1 All Pre-ride Inspection items As listed 31
2 Engine oil Contaminants Change 24, 49 – 51
3 Fuel line Deterioration, damage or leakage Replace —
4 Valve clearance Correct clearance Adjust —
5 Engine idle speed Correct idle speed Adjust 53
6 Carburetor choke Proper operation — —
7 Clutch discs Proper operation, see Note 1 Replace —
8 Air cleaner Contamination or tears Clean or replace 46 – 48
9 Spark plug Gap, tightness, proper heat range, and high-tension
terminal security
Tighten, replace
or secure
51 and 52
Competition Inspection
All items should be checked before each competition event. See your Honda dealer unless you are mechanically
qualified and have the proper tools.
NOTICE
Refer to the Maintenance Schedule (page 40) for regular service intervals.
NOTICE 1
Competition use may cause more rapid clutch disc wear. Refer to the official Honda Shop Manual, or see your
dealer for clutch disassembly and wear inspection.
(Cont.)

Honda CRF230F 2017 Specifications

General

Engine Type	223cc air-cooled single-cylinder four-stroke
Bore and Stroke	65.5mm x 66.2mm
Compression Ratio	9.0:1
Ignition	CDI
Rear Suspension	Pro-Link Showa single shock; 9.0 inches travel
Front Brake	Single 240mm disc
Rear Brake	Drum
Front Tire	80/100-21
Rear Tire	100/100-18
Curb Weight	249 pounds
Final Drive	Chain
Front Suspension	37mm leading-axle Showa fork
Trail	4.4 inches
Induction	Keihin 26mm piston-valve carburetor