21
BEFORE OPERATION
To prevent a possible fire, keep the generator at least 3 feet (1 meter)
away from building walls and other equipment during operation. Do
not place flammable objects close to the engine.
Before beginning your pre-operation checks, be sure the generator is
on a level surface and the engine switch is in the OFF position.
Check the Engine
• Before each use, look around and underneath the engine for signs
of oil or gasoline leaks.
• Check the oil level (see page 43). A low oil level will cause the Oil
Alert system to shut down the engine or prevent it from starting.
• Check the air cleaner (see page 46). A dirty air cleaner element will
restrict air flow to the carburetor, reducing engine and generator
performance.
• Check the fuel level (see page 41). Starting with a full tank will help
to eliminate or reduce operating interruptions for refueling.
Check the GFCI
Check the GFCI operation (see page 27) after starting the engine.
31Z306120.book 21 ページ ２０１５年１１月２７日 金曜日 午前１０時２５分
To Next Page
Loading...
Need help?
General
