Honda EG6500CL User Manual

34
OPERATION
Voltage Selector Switch
The power available to each receptacle depends on the position of the
voltage selector switch.
120V ONLY Position
When the voltage selector switch is in the 120V ONLY position, you do
not need to spread the load over the receptacles. You must, however,
make sure the load on any receptacle does not exceed its available
power shown below and the total load does not exceed the total
current available.
Total Current Available:
30.0 A (EG4000CL)
37.5 A (EG5000CL)
45.8 A (EG6500CL)
Switch
Position
Receptacle
Available Power
EG4000CL EG5000CL EG6500CL
120V ONLY
①
30A at 120V 30A at 120V 30A at 120V
②
20A at 120V 20A at 120V 20A at 120V
③
20A at 120V 20A at 120V 20A at 120V
20A at 120V 30A at 120V 30A at 120V
None None None
120V/240V
①
15.0A at 120V 18.8A at 120V 22.9A at 120V
②
15.0A at 120V 18.8A at 120V 20A at 120V
③
15.0A at 120V 18.8A at 120V 20A at 120V
-
15.0A at 240V 18.8A at 240V 22.9A at 240V
31Z306120.book 34 ページ ２０１５年１１月２７日 金曜日 午前１０時２５分

Honda EG6500CL Specifications

General

Brand	Honda
Model	EG6500CL
Category	Inverter
Language	English