Honda EG6500CL User Manual

40
SERVICING YOUR GENERATOR
MAINTENANCE SCHEDULE
(1) Service more frequently when used in dusty areas.
(2) These items should be serviced by your Honda servicing dealer, unless you have the proper
tools and are mechanically proficient. Refer to the Honda shop manual for service procedures.
See ‘‘Honda Publications’’ on page 70 for ordering information.
(3) For commercial use, log hours of operation to determine proper maintenance intervals.
Failure to follow this maintenance schedule could result in non-warrantable failures.
To o l s
A box wrench and wrench handle are supplied with the generator.
Use the supplied tools to perform maintenance tasks. Using an
incorrect tool may damage the generator.
REGULAR SERVICE PERIOD (3)
Perform at every indicated month
or operating hour interval,
whichever comes first.
Each
use
First
month
or
20 Hrs.
Every
3
months
or
50 Hrs.
Every
6
months
or
100 Hrs.
Every
year
or
300 Hrs.
Page
Engine oil Check level o 43
Change o o 44
Air cleaner Check o 46
Clean o (1) 48
GFCI operation Check o 27
Sediment cup Clean o 52
Spark plug Check-adjust o
49
Replace o
Spark arrester Clean o 51
Idle speed Check-adjust o (2) —
Valve clearance Check-adjust o (2) —
Combustion chamber Clean After every 1,000 Hrs. (2) —
Fuel tank and filter Clean o (2) —
Fuel tube Check Every 2 years (Replace if necessary) (2) —
Canister Check Every 2 years (2) —
Purge tube Check Every 2 years (2) —
Charge tube Check Every 2 years (2) —
ITEM
31Z306120.book 40 ページ ２０１５年１１月２７日 金曜日 午前１０時２５分

Honda EG6500CL Specifications

General

Brand	Honda
Model	EG6500CL
Category	Inverter
Language	English