59
STORAGE
Engine Oil
Change the engine oil (see page 49).
Engine Cylinder
1. Remove the spark plug (see page 54), and pour approximately one
teaspoon (5 cc) of clean engine oil into the cylinder. Crank the engine
several revolutions to distribute the oil, then reinstall the spark plug.
2. Reinstall the spark plug cap on the spark plug securely.
3. Reinstall the spark plug maintenance cover.
4. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
5. Pull the starter grip (see page 25) slowly until you feel resistance,
then return the starter grip gently. This closes the valves so moisture
cannot enter.
32Z446000.book Page 59 Friday, February 2, 2018 3:46 PM
To Next Page
Loading...
