24
Digital Clock
Indicators & Displays
Instruments & Controls
To adjust the time, proceed as follows:
Turn the ignition switch ON ( ).
Shows hour and minute while the ignition is ON ( ).
To put the clock in the adjust mode with the hour and minute display
flashing, press and hold the adjust button ( ) for more than 2 seconds.
To select the adjust mode, push the adjust button ( ) once.
To advance the hour display one unit at a time, press and release the
hour select button ( ).
To advance the hour display automatically, press and hold the hour
select button. After 2 seconds, the hour display will begin advancing.
Release the button when the display reaches the desired hour.
To advance the minute display one unit at a time, press and release the
minute select button ( ).
To advance the minute display automatically, press and hold the
minute select button. After 2 seconds, the minute display will begin
advancing. Release the button when the display reaches the desired
minute.
To zero the minute display, press and hold both the hour and minute
select buttons simultaneously for 2 seconds.
Press and hold the adjust button for more than 2 seconds when the
display reaches the desired minute. The display will stop flashing.
Press the adjust button when the display reaches the desired minute.
The display will stop flashing.
1.
2.
3.
4.
5.
6.
TRX500FPE:
TRX500FE:
TRX500FE:
TRX500FPE:
3
2
1
1
１０／０２／１２ １４：５５：１５ ３１ＨＰ０９７０ ００３３
To Next Page
Loading...
Need help?
General
