72
How to Stop the Engine
Starting & Stopping the Engine
Basic Operation & Riding
Normal Engine Stop
To stop the engine, make sure the transmission is in neutral by checking
that the neutral indicator light is on, then turn the ignition switch OFF
().
To stop the engine in an emergency, use the engine stop switch. To
operate, slide the switch to the OFF ( ) position.
Emergency Engine Stop
If your ATV is stopped with the engine stop switch OFF ( ) and the
ignition switch ON ( ), the battery will discharge.
The engine stop switch should normally remain in the RUN ( )
position even when the engine is OFF.
１０／０２／１２ １５：０１：１５ ３１ＨＰ０９７０ ００８１
To Next Page
Loading...
Need help?
General
