To Next Page

To Previous Page

7 - 17

Code 128 Message Length

Scan the bar codes below to change the message length. Refer to Message

Length Description (page 7-2) for additional information. Minimum and

Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.

Code 128 Code Page

Code pages define the mapping of character codes to characters. If the data

received does not display with the proper characters, it may be because the bar

code being scanned was created using a code page that is different from the

one the host program is expecting. If this is the case, scan the bar code below,

select the code page with which the bar codes were created (see Code Page

Mapping of Printed Bar Codes on page A-7), and scan the value and the Save

bar code from the Programming Chart on the inside the back cover of this man-

ual. The data characters should then appear properly.

Telepen

Minimum Message Length

Maximum Message Length

Code 128 Code Page

Honeywell 2020 User Manual

Questions and Answers: