Honeywell CIU 888 User Manual

Commissioning of a Standalone System Setup
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 4 - 2
$*6
4.2 Running the initial setup of the CIU 888
The first step in the procedure for the commissioning of a standalone
CIU 888 system setup is running the initial setup.
4.2.1 Logging on to the CIU 888 and changing the initial password
During the initial setup, a user has to log on to the CIU 888 and change
the initial password first.
Procedure:
1. On the PC/laptop connected to the CIU 888, launch a browser.
2. Enter the IP address of the CIU 888 in the address bar of the
browser. The IP address is: 192.168.1.1. Press the Enter key.
The Login window of the CIU 888 is displayed.
FIGURE 4-2 CIU 888: Login window
3. Enter the username and password to log in to the CIU 888. The
username is: ciuadmin. The initial password is CIU888@Enraf.
Click LOG IN.
After entering a valid username and password, the CIU 888 prompts
to change the password of the ciuadmin account (see FIGURE 4-3).
FIGURE 4-3 CIU 888: Change Password window
NOTE: Changing the password is only required during the initial setup of the CIU 888.

Honeywell CIU 888 Specifications

General

Brand	Honeywell
Model	CIU 888
Category	Recording Equipment
Language	English