Honeywell CIU 888 User Manual

Appendix H - Creation of new Modbus field device / TRL/2 Field Device
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 H - 41
$*6
APPENDIX H CREATION OF NEW MODBUS FIELD DEVICE / TRL/2 FIELD
DEVICE CONFIGURATION FILE
Based on the Modbus field device / TRL/2 field device manufacturer's
datasheet, the user shall create the Modbus field device / TRL/2 field
device configuration file according to the attached Modbus field device
configuration template.
Refer to the following sections for more information on the Modbus field
device / TRL/2 field device configuration template.
H.13 Device Type
The following table provides more information on the Device Type.
H.14 Device engineering units
The following table provides information on the various engineering
units supported by the Modbus field device.
XML Tag
Description
Possible Values
<DeviceInformation>
<DeviceType>
This is the Modbus field device
type. The user shall provide
the device type name like
SLG700, E+H ProServo etc.
Any string
<IsGPUFlexconnValid>
This is specific to TRL/2 device
and not applicable for Modbus
device. The user can provide
"TRUE" for Honeywell TRL/2
devices and "FALSE" for third
party devices.
TRUE/FALSE
XML Tag
Description
Possible Values
<DeviceInformation>
<DeviceUnits>
<Unit>
<Type>
This specifies the Device unit
type.
LEVEL
TEMPERATURE
DENSITY
PRESSURE

Honeywell CIU 888 Specifications

General

Brand	Honeywell
Model	CIU 888
Category	Recording Equipment
Language	English