Honeywell CIU 888 User Manual

Commissioning of a Standalone System Setup
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 4 - 16
$*6
FIGURE 4-12 Mange certificate: OPCUA CA Signed certificate.
c) Select the certificate and move it to the Approved Certificate
section.(see FIGURE 4-13)
FIGURE 4-13 Mange certificate: OPCUA CA Signed certificate.
d) Click on Close and when prompted for a restart, click on
Yes.Once the CIU restarts, ENTIS will communicate with the CIU
securely over OPC.
NOTE: The ENTIS client certificate is valid for a period of 1 year after which a new
certificate will be generated. The new certificate must be approved in a similar
way.
NOTE: If steps a, b, and c are redundant, they must be performed on both CIUA and
CIUB.
4.10 Verifying the working of the system setup
The last step in the commissioning procedure is verifying if the CIU 888
system setup is working properly.

Honeywell CIU 888 Specifications

General

Brand	Honeywell
Model	CIU 888
Category	Recording Equipment
Language	English