Honeywell CIU 888 User Manual

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 49
$*6
3.2.7.2 Configuring tank under Ethernet field port:
On the FTEA port node, click and choose Add > Tank
The “Add site element” window appears
In the name box, type the name and click OK.
The tank1 node is created and displayed under ethernet filed port.
NOTE: For configuring tank refer Section 3.2.7.1
Browse Click ‘Browse’ to select a water tank capacity table.
Selected file is copied to the data environment of the
selected site (C:\Users\Public\Documents\Honey-
well\CIU 888 Service Tool\SiteData-
base\<sitename>\STR.
The copied file gets the name [Water Tank name].txt.
View Click ‘View’ to view the water tank capacity table.
Note: A selected water tank capacity table file is only accepted if the used
engineering units match the global selected engineering units of the site
configuration.
Note: In case of a separate water sump in the tank, a water TCT can be used and
water TCT should be based on geometry and dimensions of the sump.
Properties Description

Honeywell CIU 888 Specifications

General

Brand	Honeywell
Model	CIU 888
Category	Recording Equipment
Language	English