E
3
Point Gas Monitor Technical Manual
19
Monitor Operation
Only 9600 baud is supported when the Modbus protocol is
selected.
Display Menu
The Display menu selects the display language (English or Français) and
whether the monitor display screen will be in Discrete mode or not. In
Discrete mode, the screen powers off after three minutes of inactivity
(activating the keypad will turn the screen back on).
* Menu *
Display
• Press enter from the main Display menu. The screen displays
Language, or press an arrow key to display Discrete. Press
enter to select.
Display
Language
• In the Language screen, use the arrow keys to scroll to Francais
or English and press enter to select.
Display
Discrete
• In the Discrete screen, use the arrow keys to scroll to Yes? or
No? and press enter to select.
Restore Menu
CAUTION: Only qualified, knowledgeable personnel should use the Restore
function of this monitor. Factory calibration settings conform to specific
standards. Any changes made may affect manufacturer’s stated standards
compliance.
The Restore menu allows users to restore all calibration information to
factory configured settings. Press enter to access the Restore menu.
* Menu *
Restore
• Use the arrow keys to scroll to Yes (or No) and press enter to
select.
Restore
Yes
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
