Honeywell luminAXS Series User Manual

37 Mounting and Connection Instructions Reader series "luminAXS"
7. Start-up
7.1 -485 address allocationRS
7.1.1 Overview of the different options for address allocation
State of delivery: Address "0" is set.
Every operated at the RS-485 module bus must have its address. Areader own p y checklausibilit
in the system prevents addresses from being allocated several times.
Possible depending on the controller.address range:
The allocation of the addresses varies. The following information is intended to assist you in
choosing the best methods for your special requirement. A detailed description on the individual
methods can be found in the following chapters.
1.) Manually via the central control unit (s 7.1. )ee 4
readerEnter the serial number of the plus the desired address via the programming of the
central control unit. The address is then stored in the .reader
Recommended standard method.
2.) Automatically with data carrier see 5( 7.1. )
readerStart the process with a data carrier in the reading area of the . The address is
allocated automatically and then stored in the . As long as the address allocationreader
mode is active, several s can be automatically allocated addresses in succession.reader
Recommendation:
readerSuitable for shorter distances between the central control unit and the individual s.
( readerManual input of the serial numbers of the s is not required).
3.) ally via IQ DeviceInstaller and configuration tool usbManu (see 7.1.6)
The allocation of an address takes place via IQ DeviceInstaller and the configuration tool usb.
Recommendation:
Suitable, if a reader should be allocated a particular address locally.
A plausibility check is not possibleATTENTION:!
4 a y via keypad - stand alone mode.) Manu ll reader operating (s 7.1. )ee 7
readerOnly the operating voltage requires connecting at the . The address allocation mode
must not be active, neither is a connection to the ACS-8 necessary.
readerAn address is allocated via the keypad at the .
Recommendation:
When servicing or testing.
:!ATTENTION A plausibility check is not possible

Honeywell luminAXS Series Specifications

General

Brand	Honeywell
Model	luminAXS Series
Category	Card Reader
Language	English