8. Appendix A: Application Notes
8.1. Application Notes
Revision 3 MC Toolkit (MCT404) User Manual 149
1. Transferring keys to PDA or Memory card
2. Managing Provisioning Devices
3. Download software for Provisioning
Devices
Over-the-air provisioning allows a user to accept or reject an un-provisioned ISA100 Wireless field
device via WDM’s user interface. With this method, an external provisioning device (PDA) would no
longer be necessary.
Configuring the Provisioning Device
Prerequisite
AcitveSync should be installed on the clients PC connected to WDM
Active Sync software is usually shipped on a CD along with the Provisioning Device
Active Sync software can be downloaded from Microsoft
Provisioning Device should have .NET Compact Framework Installed
.NET Compact Framework can be downloaded from Microsoft
Run .msi on PC, it will install framework on PDA
Provisioning Device should be connected to the client PC
Can browse files through the PC using ActiceSync
Check if “Dot net CF 3.5” software is installed on your PC
From your PDA click on Start > Settings
Select system Tab
Click on Remove Programs
Check if the list has “Microsoft .net CF 3.5”
To Next Page
Loading...
Need help?
General
