PX4ie and PX6ie High Performance Printer User Guide 81
Clean the Printhead
Cleaning the printhead on a regular basis is important for the life of the printhead
and for the print quality. Clean the printhead each time you replace the media.
Follow this procedure to clean the printhead using the cleaning card. If you need to
clean additional residue from the platen roller or tear bar, use a cotton swab
moistened with isopropyl alcohol.
1. Turn the printer off and disconnect the printer from power.
2. Open the front door and media cover.
3. Turn the printhead lift lever counter-clockwise to raise the printhead.
4. Remove any media and transfer ribbon.
5. Open the cleaning card envelope and pull out the cleaning card. Read the
warning text.
Warning: Isopropyl alcohol [(CH3)2CHOH; CAS 67-63-0] is a highly
flammable, moderately toxic, and mildly irritating substance.
Caution: Never use any sharp tools for removing stuck labels. The
printhead and rollers are delicate.
To Next Page
Loading...
Need help?
General
