50 RP2/RP4 User Guide
Belt Loop
The Velcro® loop fastens comfortably and securely around your belt and keeps the
printer secure. The nub attachment allows the printer to swivel for comfort when
you are bending over or getting in and out of vehicles.
Soft Case
Proper use of this case will allow the printer to be used in harsh, dusty, or rainy
environments. This case will protect your product against particles as small as
dust, and water from any direction. This case can be used in conjunction with the
hand/shoulder straps as well the belt-loop and belt-clip accessories.
The soft case is not designed for extensive prolonged use in the rain. Do not allow
water to enter the case when changing media.
1. Slide the printer into the case, then close the case using the 2 side zippers and
Velcro® closure.
2. Fold back the paper exit flap for each print job. The paper exit flap can also be
rolled up out of the way and secured using the Velcro® strip. Doing so decreases
the effectiveness of the case for water protection.
Caution: Excessive water inside the printer, even if a soft case is used,
may violate your warranty.
To Next Page
Loading...
Need help?
General
