Honeywell XNX-UTAI Series User Manual

XNX Universal Transmitter
Introduction
24
Figure 19. General Status Screen with unit information
Main Menu
Once the proper passcode has been entered, the transmitter
displays the Main Menu.
Figure 20. The Main Menu
From the Main Menu, a Level 1 user can:
• display the current settings/conguration
• test the transmitter
• calibrate and bump test the transmitter
• congure the unit for language, date and time
The Main Menu consists of these options:
Menu Description
See
Section...
Configure
Provides access to settings to configure the
transmitter and connected devices
Configuring
the
Transmitter
Test
Provides access to tools and settings to allow
simulation of gas events to test the system
Test Menu
?
Information
Displays current settings for the transmitter
including optional relays and Modbus
Information
Menu
Gas
Calibration
Displays the interface to calibrate sensors
attached directly to the transmitter
Gas
Calibration
Menu

Honeywell XNX-UTAI Series Specifications

General

Brand	Honeywell
Model	XNX-UTAI Series
Category	Transmitter
Language	English