1-3
Getting Started
Getting Started With the Web Interface
Getting Started With the Web Interface
This section describes the following web pages:
■ “Logging On” on page 1-3
■ “Interface Layout and Features” on page 1-4
Logging On
Follow these steps to log on through the web interface:
1. Open a web browser and enter the IP address of the switch in the web browser address field.
2. On the Login page, enter the username and password (if one has been set), and then click Log In.
By default, the username is admin and there is no password. After the initial log on, the administrator may
configure a password.
Note To set the password or change the username, see “Password Manager” on page 12-1.
Figure 1-1. Login Page
To Next Page
Loading...
Need help?
General